CIVIL WAR Antique SAVAGE .36 Caliber NAVY Percussion SINGLE ACTION Revolver Unique Early 1860s Two-Trigger Revolver

Product Description

CIVIL WAR Antique SAVAGE .36 Caliber NAVY Percussion SINGLE ACTION Revolver

Unique Early 1860s Two-Trigger Revolver

Here we present an antique Savage Navy Revolver, made circa 1862 in Middletown, Connecticut with a production run between 1961 and 1865. Only about 20,000 were ever produced, most of them for U.S. government contracts for both the Army and the Navy. Ironically, about 800 were purchased and delivered to the Navy, while about 11,000 were delivered to cavalry units in the militias and the Army. The rest of the production was sold commercially and smuggled to the Confederacy when further U.S. government contracts were not forthcoming. Known Confederate Cavalry units to have used these were: the 7^th, 34^th & 35^th Virginia, 11^th Texas and 7^th Missouri Cavalries. Known Northern units were the 5^th Kansas, 7^th New York, 1^st & 2^nd Wisconsin.

This was one of the most unique revolvers of the American Civil War, both in function and in form. Some in the field consider these to be “ugly” guns, and you may commonly see them referred to as the “Ugly Duckling”. Regardless, the thoughtfulness of design made this a feature packed revolver that gave it a good shot at government contracts, in spite of it being a bit more expensive.

The most visually distinguishing characteristics of the Savage Navy Revolver are the double ring trigger and trigger guard, as well as the sleek profile with the low bore axis and solid frame. The low bore axis made for less muzzle flip when fired, making follow up shots faster and pointing more natural. The solid frame was an improvement in durability over open top frame designs. Remington and Whitney both featured this improvement, while Colts clung to the open top frame (and no wonder, since they were selling them as fast as they could make them during the war). The ring trigger on the bottom causes the hammer to cock and the cylinder assembly to retract in the frame and revolve. By the same token, once the cocking lever was released, the cylinder would go to rest with the end of the chamber against the back of the barrel, making a better gas seal than most. The blade trigger above the ring trigger simply causes the hammer to drop through a hole in the top of the frame. Unlike most other percussion revolvers of the day, the Savage percussion nipples face out from the cylinder and are canted back. This was more easily accessible, and less apt to cause a jam in the action if a cap were to fall off.

The action does not entirely function: a pull of the lower trigger will cam and revolver the cylinder as well as move the hammer back, however, the hammer will not stay in the cocked position. Weather and use apparent with a brown patina. Good, clear, aged bore. Both grips are seated firmly with an above average amount of wear (dents, chips, and dings). The right grip is a bit frayed at the top.

Own the original! This is a legitimate antique and not a reproduction.

Barrel is 7 1/8 inches.

Caliber: .36 Percussion

Overall condition as seen in photos.

Very Fast. Very Safe. FREE SHIPPING WORLDWIDE. Delivered directly to your door by express mail!

Guaranteed AUTHENTIC & Includes CERTIFICATE OF AUTHENTICITY.

www.ancestryguns.com

$2895
#217155